|
Post by admin on Dec 31, 2009 16:31:35 GMT 10
TEAM SPEAK Team speak3 is XP,VISTA, Windows7 and APPLE-MAC friendly and is very easy to setup. Just click on the team speak link below and RUN and install the client version that suits your pc's opperating system just one thing,,,when installing and you get to the part about "configerations", remember to select the "OWN" not "GLOBAL" button www.teamspeak.com/?page=downloads[glow=red,2,300] PLEASE FOLLOW THESE INSTRUCTIONS BELOW[/glow] once its installed,,,, open or launch teamspeak3 if you have a microphone on your pc before you connect we need to do some settings firstly click on the settings tab up the top next click on SETUP WIZARD and run through the 4 steps Make sure you set it to Push to talk not Voi ce activatedonce thats all done click on "connections" tab in the top left corner then "connect" then a box will pop up in address type in 70.88.81.181in nickname type in your name or your nickname then click the connect tab at the bottom ;D ;D ;D ;D ;D cheers mick,,,,,,,,,,,,,
|
|
|
Post by Ally on Jan 11, 2010 19:03:55 GMT 10
If you get the error message:--------------------------- Error --------------------------- TeamSpeak 3 cannot write to the configuration file:C:/Program Files/TeamSpeak 3 Client/config/ts3clientui_qt.conf You can use TeamSpeak 3, but all settings will be lost!--------------------------- Ignore Abort ---------------------------
This is how to fix it !
Got to program files on your c drive Open the Teamspeak 3 folder and right click the config folder then go to -> Properties -> Security -> Edit -> Select your user account and add full access rights. Now close both windows with "OK". Same with the logs folder.
|
|
|
Post by Ledge on Jan 12, 2010 15:19:10 GMT 10
Thanks for posting that Ally,,,,,it had me stumped,,,,,none of my puters have had that problem so it was a bit hard to work out what to do now if anyone else has the same prob i'l send them here to your post,,, cheers mick,,,,,,,,,,,
|
|
|
Post by Ally on Jan 14, 2010 13:49:42 GMT 10
I have been logging and making sure its all ok over the last few days and there hasnt been any prob's, so must have fixed the prob.
|
|
archie
JNR GYB MEMBER
Posts: 25
|
Post by archie on Mar 19, 2010 17:15:33 GMT 10
Can anybody help my mic works in all other programs and my pc but not team speak works in vent fine works on my pc fine but just not in teak speak any ideas? ??
|
|
|
Post by D-Rail on Mar 19, 2010 18:03:31 GMT 10
1. make sure it's selected as the input device 2. make sure your wheel is in neutral when trying to select the push to talk key.
|
|
archie
JNR GYB MEMBER
Posts: 25
|
Post by archie on Mar 20, 2010 9:39:32 GMT 10
1. make sure it's selected as the input device 2. make sure your wheel is in neutral when trying to select the push to talk key. Where do i find input device m8??? Wheel is unplugged
|
|
|
Post by D-Rail on Mar 20, 2010 10:47:59 GMT 10
Start Teamspeak go to Settings: Options: and then Capture
You'll see a drop down list beside Capture Device. make sure that your correct input is selected.
It'll either be your microphone (VIA soundcard jack), or the brand name of the USB headset if using a USB mic.
|
|
wayne
New GYB MEMBER
Posts: 4
|
Post by wayne on Apr 30, 2010 14:42:49 GMT 10
thanks D
will try again tonight.
Cheers ;D
|
|
|
Post by admin on May 10, 2010 11:07:43 GMT 10
FOR THOSE HAVING PROBLEMS WITH THIER HOTKEY go to SETTINGS at the top of your team speak Then click on OPTIONS Then click HOTKEYS TAB on the left Make sure there is only 2 assignments one for up and one down if there are any more then delete them. also when assigning your "push to talk button" IN THE WIZARD make sure your gear shifter is in neutral
|
|
|
Post by admin on Oct 29, 2011 4:39:51 GMT 10
the new ip number is 70.88.81.181
sorry for the inconvenience guys
|
|